Sony XAV-68BT Operating Instructions - Page 28
Picture, Sound, Disc operation, USB playback, The soundtrack/subtitle language or angle - reset
View all Sony XAV-68BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Picture There is no picture/picture noise occurs. A connection has not been made correctly. Check the connection between this unit and other equipment, and set the input selector of the equipment to the source corresponding to this unit. The disc is defective or dirty. Installation is not correct. Install the unit at an angle of less than 45° in a sturdy part of the car. The parking cord (light green) is not connected to the parking brake switch cord, or the parking brake is not applied. The picture does not fit in the screen. The aspect ratio is fixed on the DVD. There is no picture/picture noise occurs in the rear monitor. A source/mode which is not connected is selected. If there is no input, no picture appears in the rear monitor. The color system setting is incorrect. Set the color system to [PAL] or [NTSC] according to the connected monitor (page 17). The picture of the rear view camera is displayed on this unit. No picture appears in the rear monitor if the picture of the rear view camera is displayed on this unit. Sound There is no sound/sound skips/sound cracks. A connection has not been made correctly. Check the connection between this unit and the connected equipment, and set the input selector of the equipment to the source corresponding to this unit. The disc is defective or dirty. Installation is not correct. Install the unit at an angle of less than 45° in a sturdy part of the car. The MP3 file sampling rate is not 32, 44.1, or 48 kHz. The WMA file sampling rate is not 44.1 kHz. The MP3 file bit rate is not 48 to 192 kbps. The WMA file bit rate is not 48 to 192 kbps. The unit is in pause/reverse/fast-forward mode. The settings for the outputs are not made correctly. The DVD output level is too low (page 13). The volume is too low. The ATT function is activated. The format is not supported (such as DTS). Check if the format is supported by this unit (page 22). 28GB Sound is noisy. Keep cords and cables away from each other. Disc operation The disc does not play. The disc is defective or dirty. The disc is not playable. The DVD is not playable due to the region code. The disc is not finalized (page 23). The disc format and file version are incompatible with this unit (page 22). Press to remove the disc. MP3/WMA/Xvid/MPEG-4 files do not play. Recording was not performed according to the ISO 9660 level 1 or level 2 format or the Joliet or Romeo expansion format (DATA CD), or the UDF Bridge format (DATA DVD) (page 22). The file extension is incorrect (page 23). Files are not stored in MP3/WMA/Xvid/MPEG-4 format. If the disc contains multiple file types, only the selected file type (audio/video) can be played. Select the appropriate file type using the list (page 12). MP3/WMA/Xvid/MPEG-4 files take longer to play than others. The following discs take a longer time to start playback. a disc recorded with a complicated tree structure. a disc to which data can be added. Certain functions cannot be performed. Depending on the disc, you may not be able to perform operations such as stop, search, or repeat/shuffle play. For details, refer to the manual supplied with the disc. The soundtrack/subtitle language or angle cannot be changed. Use the DVD menu instead of the direct selection button on the remote commander (page 10). Multilingual tracks, multilingual subtitles, or multi-angles are not recorded on the DVD. The DVD prohibits changing. The operation buttons do not function. The disc will not eject. Press the reset button (page 5). USB playback Items cannot be played via a USB hub. Connect iPod/USB devices to this unit without USB hub. Items cannot be played. Reconnect the USB device.