Sony XAV-68BT Operating Instructions - Page 8
Listening to the Radio, To install the microphone, Reception controls, Reception indications
View all Sony XAV-68BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
4 Touch [Pairing]. The unit enters pairing standby mode. 5 Perform the pairing procedure on the BLUETOOTH device to detect this unit. 6 Select "SONY:XAV-68BT" shown in the display of the BLUETOOTH device. 7 If passkey* input is required on the BLUETOOTH device, input [0000]. * Passkey may be called "passcode," "PIN code," "PIN number," "password," etc., depending on the BLUETOOTH device. 8 Select this unit on the BLUETOOTH device to establish the BLUETOOTH connection. or lights up when the connection is made. Note While connecting to a BLUETOOTH device, this unit cannot be detected by another device. To enable detection, terminate the current connection. Connecting with a paired BLUETOOTH device This chapter explains how to connect manually to registered BLUETOOTH devices. 1 Make sure that the BLUETOOTH signals both on this unit (page 18) and the BLUETOOTH device are activated. on the status bar indicates that the BLUETOOTH signal on this unit is on. 2 Operate the BLUETOOTH device to connect to this unit. or appears. When the ignition is turned to on with the BLUETOOTH signal activated, this unit searches for the last-connected BLUETOOTH device, and connection is made automatically if possible. Note If this unit cannot detect the last-connected BLUETOOTH device, touch [Reconnect] to search for the last-paired device again. If the problem is not solved, follow the pairing procedure. To install the microphone To capture your voice during handsfree calling, you need to install the microphone (supplied). For details on how to connect the microphone, refer to the supplied "Installation/Connections" guide. Listening to the Radio Listening to the Radio To listen to the radio, press HOME then touch [Tuner]. Reception controls/indications Reception controls ( to ) Current band icon Opens the band list. [PTY] (Program Types) (FM only) Opens the PTY list (page 10). [ZAP] (ZAPPIN™) Helps to find a desired station by listening to preset stations for a few seconds. Opens the tuner option menu. / Tunes in automatically. / Tunes in manually. Touch and hold to continuously skip frequencies. [1] to [6] Selects a preset station. Touch and hold to store the currently displayed frequency in that preset. Reception indications () Frequency 8GB