Symphonic SC1303 Owner's Manual - Page 12
Deleting Or Adding, Channel, Channel Set Up Again
View all Symphonic SC1303 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
AUTOMATIC CLOCK SETTING Make sure ... • The TV/VCR is turned on. • Confirm the TV/VCR is receiving a RF (Radio Frequency) signal from either an antenna or cable system connection using the ANT IN jack on the rear of the TV/VCR. NOTE: • If a cable converter box is being used, make sure it is powered on. • You must use the TV/VCR remote control to per- form the clock setting procedure. • If the TV/VCR is connected directly to a cable con- verter box or satellite box, the local PBS station must be selected on the cable box itself, and the TV/VCR must be set to the output channel of the cable converter box or satellite box (usually chan- nel 3 or 4), to be able to set up or correct the clock automatically. NOTE:During Auto Clock CH Search, the picture may be distorted. This is normal. 4 Enter the channel number that contains the Automatic Clock Setting Signal Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to select "SETTING CLOCK". Press the F.FWD/B button to enter "SETTING CLOCK" menu. - M E N U - TIMER PROGRAMMING PICTURE CONTROL B SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH - SETTING CLOCK - Press the STOP/L button to select "AUTO CLOCK CH". Press the F.FWD/B or REW/s AUTO CLOCK [ON] AUTO CLOCK CH SEARCH B AUTO CLOCK CH [ 45] MANUAL CLOCK SET D.S.T. [OFF] buttons until you locate Auto Clock Set station number. See item 3 above. Press the MENU button to exit the screen. 1 Select "SETTING CLOCK" Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to select "SETTING CLOCK". Press the F.FWD/B button to enter "SETTING CLOCK" menu. - M E N U - TIMER PROGRAMMING PICTURE CONTROL B SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH 5 Turn off the TV/VCR Once the TV/VCR is turned off , it will periodically check and set the correct date and time. CHANNEL SET UP AGAIN Make sure ... 2 Set "AUTO CLOCK" to [ON] - SETTING CLOCK - • Press the POWER button to turn on the TV/VCR. Press the F.FWD/B button until AUTO CLOCK [ON] appears. B AUTO CLOCK [ON] AUTO CLOCK CH SEARCH AUTO CLOCK CH [ 02 ] MANUAL CLOCK SET D.S.T. [OFF] 3 Begin "AUTO CLOCK CH SEARCH" Press the STOP/L button to select "AUTO CLOCK CH SEARCH". - SETTING CLOCK - 1 Select "CHANNEL SET UP" Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to "CHANNEL SET UP". Then, press the F.FWD/B button. - M E N U - TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK B CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH Press the F.FWD/B button. • The TV/VCR is now searching for the station which contain the auto clock set signal. The search for a signal may take up to 20 AUTO CLOCK [ON] B AUTO CLOCK CH SEARCH AUTO CLOCK CH [ 02 ] MANUAL CLOCK SET D.S.T. [OFF] 2 Begin auto preset Press the PLAY/K or STOP/L button to point to "AUTO PRESET". Then, press the F.FWD/B button. - CHANNEL SET UP - ADD / DELETE CH (TV) B AUTO PRESET seconds per channel. • "_ _" appears at the lower left of the screen when the search has - AUTO CLOCK CH SEARCH - 08 10 13 The tuner scans and memorizes all the active channels in your area. ended. • Auto Clock station- write down __ the number(s) that appear on the 3 After scanning The tuner stops on the lowest memorized channel. screen. These are the auto clock station(s) in your area. See item 4 below. • If no number(s) appear on the TV screen, there are no stations in your area which contain the Auto Clock signal. Auto Clock Setting is not possible. Please use Manual Clock Setting on page 11. Press the MENU button to exit the screen. DELETING (OR ADDING) CHANNEL The channels you no longer receive or seldom watch can be deleted from the memory. (Of course, you can add the deleted channel into the memory again.) - 12 - EN 9I03