Symphonic SC1303 Owner's Manual - Page 20
Knormal Recording Lskipping Unwanted Kscenes During Recording Lotr One Touch Recording
View all Symphonic SC1303 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Make sure ... • TV/VCR power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) NOTE: This unit will ONLY record and view the same channel. NORMAL RECORDING You can ONLY watch the same TV program that is being recorded. 1 Select the channel to be recorded Press the number buttons on the CH 10 remote control or the CHANNEL K or L button. Remember: If the TV/VCR is con- nected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be recorded must be selected on the cable box or satellite box. 2 Select the tape speed Press the SPEED button to select the desired tape speed (SP/ SLP). SP 3 Begin recording REC Press the RECORD button. SP 4 Stop recording Press the STOP button when recording is completed. SKIPPING UNWANTED SCENES DURING RECORDING Press the PAUSE/STILL button to PAUSE temporarily stop recording. Press the PAUSE/STILL or RECORD button to resume record- ing. SP NOTES: • After five minutes, the TV/VCR will automatically switch to the Recording mode to prevent tape dam- age. • If "CLOSED CAPTION (ON)" is selected, the On- Screen Display will appear for 5 seconds, then dis- appear. OTR (One Touch Recording) This function enables you to set a recording length simply by pressing the REC/OTR button on the TV/VCR. Make sure ... • TV/VCR power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) NOTES: • This function CANNOT be done from the remote control. • Recording starts immediately when the REC/OTR button is pressed. • When the REC/OTR button is pressed 18 times, the TV/VCR returns to the Normal Recording mode. • To stop the OTR operation, press the STOP button on the TV/VCR or on the remote control. • To show the remaining time, press the DISPLAY button on the remote control so that "OTR" appears on the TV screen. (It will show up momentarily then disappear.) • Recording stops when 0:00 is reached. • Please note that in the SLP mode maximum record- ing time, assuming the tape is started at the beginning, is 8 hours using T-160 (or 6 hours using T-120). • If the tape runs out before the end time, the TV/VCR will switch to the Stop mode immediately, ejects the tape and turns itself off. • If you press the power button during OTR, the TV/VCR continues recording until the selected length is reached. 1 Select the channel to be recorded Press the number buttons on the remote control or the CHANNEL K or L button. Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be recorded is selected on the cable box or satellite box. 2 Select the tape speed Press the SPEED button to select the desired tape speed (SP/ SLP). - 20 - EN 9I03