Symphonic SC1303 Owner's Manual - Page 25

Maintenance, On Screen Display, Special Features

Page 25 highlights

ON SCREEN DISPLAY To check the Counter, Clock and Channel number on the TV screen, press the DISPLAY button on the remote control. Each time you press the DISPLAY button on the remote control, the TV screen will change as follows: WHEN THE CLOSED CAPTION MODE IS OFF: • Counter mode: After 5 seconds, only the counter remains. To clear it, press the DISPLAY button. • Clock mode: After 5 seconds, only the clock and the channel number remain. To clear them, press the DIS- PLAY button. Press once COUNT 0:12:34 Press once 5:40PM CH2 Press once WHEN THE CLOSED CAPTION MODE IS ON: • The On Screen Display disappear after 5 seconds. • This is true even if the MUTE button is pressed, or the PAUSE/STILL button is pressed while recording. OFF mode Clock/Counter mode STOP 5:40 PM CH2 SPECIAL FEATURES SP COUNT 0:12:34 REAL TIME TAPE COUNTER This shows the elapsed recording or playback time in hours, minutes, and seconds. (The displayed time will not change on a blank tape or blank portions on the tape.)The "-" indication will appear when the tape has rewound further than "0:00:00" on the tape counter. AUTO REWIND-EJECT • When the end of a tape is reached during record- ing, playback, or fast-forward, the tape will automatically rewind to the beginning. After rewinding finishes, the TV/VCR will eject the tape and turn itself to off. • This function is operative when Repeat Play is set to the [OFF] position. • The tape will not auto-rewind during timer record- ing or One Touch Recording. MAINTENANCE CABINET CLEANING • Wipe the front panel and other exterior surfaces of the TV/VCR with a soft cloth immersed in lukewarm water and wrung dry. • Never use a solvent or alcohol. Do not spray insec- ticide liquid near the TV/VCR. Such chemicals may cause damage and discoloration to the exposed surfaces. AUTO HEAD CLEANING • Automatically cleans video heads as you insert or remove a cassette, so you can see a clear picture. • Playback picture may become blurred of interrupt- ed while the TV program reception is clear. Dirt accumulated on the video heads after long periods of use, or the usage of rental or worn tapes can cause this problem. If a streaky or snowy picture appears during play- back, the video heads in your TV/VCR may need to be cleaned. 1.Please visit your local Audio/Video store and purchase a good quality VHS Video Head Cleaner. 2.If a Video Head Cleaner does not solve the problem, please call our help line at 1-800-242-7158, to locate an Authorized Service Center. NOTES: • Remember to read the instructions included with the video head cleaner before use. • Clean video heads only when problems occur. SERVICING • Should your TV/VCR become inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power cord, and please call our help line at 1-800242-7158, to locate an Authorized Service Center. - 25 - EN 9I03

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

- 25 -
EN
9I03
CABINET CLEANING
Wipe the front panel and other exterior surfaces of
the TV/VCR with a soft cloth immersed in luke-
warm water and wrung dry.
Never use a solvent or alcohol. Do not spray insec-
ticide liquid near the TV/VCR. Such chemicals
may cause damage and discoloration to the
exposed surfaces.
AUTO HEAD CLEANING
Automatically cleans video heads as you insert or
remove a cassette, so you can see a clear picture.
Playback picture may become blurred of interrupt-
ed while the TV program reception is clear. Dirt
accumulated on the video heads after long periods
of use, or the usage of rental or worn tapes can
cause this problem.
If a streaky or snowy picture appears during play-
MAINTENANCE
back, the video heads in your TV/VCR may need
to be cleaned.
1.Please visit your local Audio/Video store and pur-
chase a good quality VHS Video Head Cleaner.
2.If a Video Head Cleaner does not solve the prob-
locate an Authorized Service Center.
NOTES:
Remember to read the instructions included with
the video head cleaner before use
.
Clean video heads only when problems occur.
SERVICING
Should your TV/VCR become inoperative, do not
try to correct the problem by yourself. There are no
user-serviceable parts inside. Turn off, unplug the
ON SCREEN DISPLAY
To check the Counter, Clock and Channel number on the TV screen, press the DISPLAY button on the remote
control. Each time you press the DISPLAY button on the remote control, the TV screen will change as follows:
WHEN THE CLOSED CAPTION MODE IS OFF:
Counter mode: After 5 seconds, only
the counter remains. To clear it, press
the DISPLAY button.
Clock mode: After 5 seconds, only
the clock and the channel number
remain. To clear them, press the DIS-
PLAY button.
WHEN THE CLOSED CAPTION MODE IS ON:
The On Screen Display disappear after 5 seconds.
This is true even if the MUTE button is pressed, or the
PAUSE/STILL button is pressed while recording.
OFF mode
Clock/Counter mode
SPECIAL FEATURES
REAL TIME TAPE COUNTER
This shows the elapsed recording or playback time in
hours, minutes, and seconds. (The displayed time
will not change on a blank tape or blank portions on
the tape.)The “–” indication will appear when the
tape has rewound further than “0:00:00” on the tape
counter.
AUTO REWIND-EJECT
When the end of a tape is reached during record-
ing, playback, or fast-forward, the tape will auto-
matically rewind to the beginning. After rewinding
finishes, the TV/VCR will eject the tape and turn
itself to off.
This function is operative when Repeat Play is set
to the [OFF] position.
The tape will not auto-rewind during timer record-
ing or One Touch Recording.
STOP
5:40 PM
CH2
SP
COUNT
0:12:34
COUNT
0:12:34
5:40PM
CH2
<Counter mode>
<Off mode>
<Clock mode>
Press
once
Press
once
Press once
lem, please call our help line at 1-800-242-7158, to
power cord, and please call our help line at 1-800-
242-7158, to locate an Authorized Service Center.