Symphonic TVCR19G1 Owner's Manual - Page 11
Installing, Batteries, External, Input
View all Symphonic TVCR19G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
CABLE WITHCONVERTERIDESCRAMBLER BOX OR SATELLITE BOX If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown here. With this connection you can record and view any channel including scrambled channels. However, channel selection must be made with the converter box. This means that channels cannot be changed using the TVNCR Remote Control. Unattended recording is limited to one channel at a time. INSTALLING THE BATTERIES I) Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow. 2) Insert 2 "AA" penlight batteries into the battery compartment in the direction indicated by the polarity (+/-) markings. 3) Replace the cover. 0 OUT IN 75-ohm Coaxial Cable (not supplied) ANT. Satellite Box Cable Box (not supplied) From Cable System or Satellite Dish O O CD EXTERNAL INPUT MODE When using an external input signal (another VCR or camcorder), connect the player's audio/video output ca- bles to the AUDIO IN, VIDEO IN jacks of your AUX TV/VCR. Then press CHANNEL A or V button or enter "00" with number but- ton so that "AUX" appears on the screen. TO RECORD AND VIEW A SCRAMBLED/UNSCRAMBLED CHANNEL 1. Set the TVNCRchannel selector to the output channel of the cable converter box or satellite box. (Ex. CH3) 2. Select the channel to be recorded or viewed on the cable converter box or satellite box. - 11 - EN 6L24