TEAC CD-RW880 Owners Manual - Page 23
Messages, Specifications, Error Messages
View all TEAC CD-RW880 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
ENGLISH Messages Specifications Messages BLANK 0:00 A blank CD-R/CD-RW disc is set on the tray. CLOSE Close the disc tray. ERASE Erase the last track of the CD-RW disc. ERASE DISC Erase all the tracks of the CD-RW disc. FINALIZE Finalize the disc. FS 44_1K, FS 32K or FS 48K The sampling frequency of the digital source NO DISC No readable disc has been loaded. NOW OPC Appears during OPC (Optimum Power Control). Wait a few seconds. OPEN Open the tray. - - - -:- The unit is reading the disc. PMA WRITE Writing the recorded memories on the disc. (PMA: Program Memory Area) READING The unit is reading the disc. Wait a few seconds. REFRESH Refresh the CD-RW disc. REPAIR Repair the disc. UNFINALIZE Unfinalize the CD-RW disc. Media type CD-RW and CD-R for Digital audio (record and playback) CD (playback only) Frequency converter input sampling frequency 32 kHz, 48 kHz Recording sampling frequency 44.1 kHz Frequency response 20 Hz to 20 kHz (playback: ±1.5 dB, recording: ±1.5 dB) Signal to noise ratio 90 dB (playback) 90 dB (digital recording) 82 dB (analog recording) Dynamic range 86 dB (playback) 84 dB (recording) Total Harmonic Distortion Less than 0.05% (playback) Less than 0.05% (recording) Wow & flutter Unmeasurable Audio Input Sensitivity/Impedance LINE: -6 dBV (0.5 V)/20 kΩ Output Level/Impedance LINE : -6 dBV (0.5 V)/1 kΩ Maximum output level LINE:+6dBV (2.0V) Power requirements 120V, 60Hz Power consumption 16 W Dimensions (W x H x D 435 x 100 x 295 mm (17 1/8" x 3 15/16" x 11 5/8") Weight (Net 4.5 kg (9 15/16 lbs) Standard Accessories RCA cable x 2 Optical digital cable x 1 Remote control unit x 1 Battery (AA, R6, SUM-3) x 2 Owner's manual x 1 Warranty card x 1 Error Messages DIN UNLOCK A digital input source has been selected, but the source is not connected or is not switched on. READ ERROR Something is wrong with the disc. Press the OPNE/CLOSE button and change the disc. DISC FULL There is no space on the disc, or no more tracks are available. NO TOC The SHUFFLE or the PROGRAM button was pressed with an unfinalized disc. Programmed playback and shuffle playback works with finalized discs only. PGM FULL 32 tracks have been programmed. No more tracks can be programmed. TRAY ERROR An error occurred within the unit. Press the POWER switch to turn the unit off, wait a minute, and turn it on again. < Design and specifications are subject to change without notice. < Weight and dimensions are approximate. < Illustrations may differ slightly from production models. 23