TEAC CD-RW880 Owners Manual - Page 5
Connections, ANALOG IN/OUT jacks, DIGITAL IN terminal, AC Power Cord - recorder
View all TEAC CD-RW880 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Connections CAUTION: < Switch off the power to all equipment before making connections. < Read the instructions of each component you intend to use with this unit. < Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the signal interconnection cables together with the AC power cord. BA ENGLISH DIGITAL OUT RL RL REC PLAY CD Player, MD Deck, etc. Amplifier C AC Outlet A ANALOG IN/OUT jacks Analog 2-channel audio signal is input or output from these jacks. Connect these jacks to the amplifier with RCA cables. CD-WR880 Amplifier ANALOG OUT q MD PLAY, TAPE PLAY, etc. ANALOG IN q MD REC, TAPE REC, etc. Make sure to connect: white plug q white jack (L: left channel) red plug q red jack (R: right channel) B DIGITAL IN terminal To record digital audio signals, connect this terminal to the digital output terminal of a digital device such as a CD player, MD deck, etc. with an optical digital cable. < Keep the supplied cap to cover the terminal when it is not in use. C AC Power Cord After all other connections are complete, connect the plug to the AC wall socket. Be sure to connect the power cord to an AC outlet which supplies the correct voltage. Hold the power plug when plugging or unplugging the power cord. Never pull or yank on the power cord. 5