TEAC CD-RW900SL CD-RW900SL Owner's Manual - Page 15
Operation basics - tascam remote
View all TEAC CD-RW900SL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
IMPORTANT SA3FE−TYMIeNnSuTRoUpCeTraIOtiNoSn Operation basics 1. Select the desired menu option. Press the MENU key on the front panel or remote control to call up the desired menu. The menu option PLAY will be shown on the display at first. Front panel operation: Rotate the MULTI JOG dial to select the desired menu option, then push the dial to confirm. Remote control operation: Use the SKIP key to cycle through the different menu options, then press the ENTER key to confirm. The sub-menu option screen of the selected menu will be displayed. If the PLAY menu option is selected, the sub-menu option shows up like this: 3. Setting the desired menu item or value. Front panel operation: Use the MULTI JOG dial to select the desired menu item or value. Pushing the dial enters and exits menu mode. Remote control operation: Use the SKIP key. Pressing the ENTER key confirms and exits menu mode. NOTE Some menu options exist for confirmation purposes only, and the setting cannot be changed. 4. How to exit menu mode after setting (or confirmation), during menu option display. Front panel operation: As well as pushing the MULTI JOG dial, you can use the MENU key to exit menu mode. Remote control operation: Press the ENTER key to exit menu mode. NOTE Return to the menu option selection screen, press the ESCAPE key on the front panel or the CLEAR key on the remote control. 2. Select the desired sub-menu. Front panel operation: Rotate the MULTI JOG dial to select the desired sub-menu, then push the dial to enter the selection. Remote control operation: Use the SKIP key to select, then press the ENTER key. The menu item screen of the selected sub-menu will appear. If the sub-menu PLAY MODE is selected, the menu item shows up like this: NOTE The selected menu mode remains after power is turned off, except the TEXT menu. To reset all the settings and return to the factory setting, use the F_PRESET sub-menu in the SYSTEM menu option. It should only be used when a disc is not loaded. When IR REMOTE is set to Disable, some functions can not be operated using the remote control. On the other hand, set to Enable allows any operation using the remote control. NOTE To return to the sub-menu option selection screen, press the ESCAPE key on the front panel or the CLEAR key on the remote control. 15 TASCAM CD-RW900SL