TEAC CD-RW900SL CD-RW900SL Owner's Manual - Page 28

− After recording

Get TEAC CD-RW900SL PDF manuals and user guides View all TEAC CD-RW900SL manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

6IM−PAOfRtTeAr NreTcSoArdFEinTgY PRECAUTIONS This section deals with the actions taken after record-ing: finalizing for CD-R and CD-RW discs, and erase operations for CD-RW discs. Once finalized, CD-R discs are truly final-no more can be recorded on them. By contrast, CD-RW discs can be "unfinalized" using the CD-RW900SL, i.e. their TOC can be deleted, and if there is space, further material can be Finalizing As has been explained earlier ("About Finalizing" on page 7), in order for a disc to become a standard CD, it must have a Table of Contents (TOC) written to it. This process is known as finalizing. An unfinalized disc can always be distinguished on the CD-RW900SL by the TOC indicator under the disc type on the display being unlit when the disc is inserted. To finalize a disc: 1. Load the unfinalized disc, and with the unit in stop mode, press the FINALIZE key. The display shows FINALIZE? If you do not want to proceed with the finalizing process, press the FINALIZE/INS key on the front panel or the FINALIZE key on the remote control. 2. To start the finalizing process, push the MULTI JOG dial or press the ENTER key on the remote control. The display shows Sure? If you do not want to proceed with the finalizing process, press the STOP key. recorded on them. Even if the disc is full, tracks can be erased following the unfinalize process, and new material can be recorded. 3. When finalization has been chosen, the display shows the TOC flashing and the remaining time. The unit starts counting down from a time shown on the display. 4. When finalization has been finished successfully, Complete appears and the TOC will be lit on the display. NOTE During the finalizing process, all key presses are ignored. Unfinalizing CD-RW discs If a CD-RW disc has been finalized, it is possible to erase the Table of Contents in the following way: 1. With the finalized disc loaded and the unit in stop mode, press the ERASE/DEL key on the front panel or the ERASE key on the remote control. Rotate the MULTI JOG dial or press the SKIP key on the remote control to select UNFINALIZE?. Push the MULTI JOG dial or press the ENTER key to confirm. If you do not want to proceed with the unfinalizing process, press the ERASE/DEL key on the front panel or the SKIP key on the remote control. 2. The display shows Sure? If you do not want to proceed with the unfinalizing process, press the STOP key. 3. To start the unfinalizing process, press the MULTI JOG dial or the ENTER key again. When unfinalization has been chosen, the display shows Erase flashing and the remaining time. The unit starts counting down from a time shown on the display. 4. When finalization has been finished successfully, Completeappears on the display, and the TOC indicator will go off. 28 TASCAM CD-RW900SL

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
IMPORTANT SAFETY PRECAUTIONS
±·
TASCAM
CD-RW900SL
±·
TASCAM
CD-RW900SL
Unfinalizing CD-RW discs
If a CD-RW disc has been finalized, it is possible to erase
the Table of Contents in the following way:
1.
With the finalized disc loaded and the unit in stop
mode, press the
ERASE/DEL
key on the front panel
or the
ERASE
key on the remote control.
Rotate the
MULTI JOG
dial or press the
SKIP
key
on the remote control to select
UNFINALIZE?
.
Push the
MULTI JOG
dial or press the
ENTER
key
to confirm.
If you do not want to proceed with the unfinaliz-
ing process, press the
ERASE/DEL
key on the front
panel or the
SKIP
key on the remote control.
2.
The display shows
Sure?
If you do not want to proceed with the unfinalizing
process, press the
STOP
key.
3.
To start the unfinalizing process, press the
MULTI
JOG
dial or the
ENTER
key again.
When unfinalization has been chosen, the display
shows
Erase
flashing and the remaining time.
The unit starts counting down from a time shown
on the display.
4.
When finalization has been finished successfully,
Complete
appears on the display, and the
TOC
indi-
cator will go off.
Finalizing
As has been explained earlier (“About Finalizing” on page
7), in order for a disc to become a standard CD, it must
have a Table of Contents (TOC) written to it. This process
is known as finalizing.
An unfinalized disc can always be distinguished on the
CD-RW900SL by the
TOC
indicator under the disc type on
the display being unlit when the disc is inserted.
To finalize a disc:
1.
Load the unfinalized disc, and with the unit in stop
mode, press the
FINALIZE
key.
The display shows
FINALIZE?
If you do not want to proceed with the finalizing
process, press the
FINALIZE/INS
key on the front
panel or the
FINALIZE
key on the remote control.
2.
To start the finalizing process, push the
MULTI JOG
dial or press the
ENTER
key on the remote control.
The display shows
Sure?
If you do not want to proceed with the finalizing
process, press the
STOP
key.
3.
When finalization has been chosen, the display
shows the
TOC
flashing and the remaining time.
The unit starts counting down from a time shown
on the display.
4.
When finalization has been finished successfully,
Complete
appears and the
TOC
will be lit on
the display.
NOTE
During the finalizing process, all key presses are ignored.
This section deals with the actions taken after record-ing:
finalizing for CD-R and CD-RW discs, and erase opera-
tions for CD-RW discs.
Once finalized, CD-R discs are truly final—no more can
be recorded on them. By contrast, CD-RW discs can be
“unfinalized” using the CD-RW900SL, i.e. their TOC can
be deleted, and if there is space, further material can be
recorded on them. Even if the disc is full, tracks can be
erased following the unfinalize process, and new material
can be recorded.
6 − After recording