TEAC CD-RW900SL CD-RW900SL Owner's Manual - Page 29

IMPORTANT SAF6ET−YAIfNteSTrRrUecCoTrIOdiNnSg Erasing Erasing tracks This operation erases the specified track and all sub-sequent tracks from a recorded CD-RW disc. NOTE Once this operation has started, the STOP key cannot be used to cancel it. Please check the track range to be deleted first. Erasing track is operated only when unit is in continuos playback. 1. While stopped, press the ERASE/DEL key on the front panel or the ERASE key on the remote control. Select the ERASE TRACK? rotating the MULTI JOG dial or pressing the SKIP key on the remote control. To cancel the operation at this point, press the ERASE/DEL or the ERASE key again. 2. Push the MULTI JOG dial or press the ENTER key to enter the function. The display shows Erase XX-XX(the number of Erasing a whole disc When you want to erase a whole disc (all the tracks on a disc), follow the procedure below: NOTE Once the operation is proceeded, the STOP key cannot function. Please confirm before the operation. 1. While stopped, press the ERASE/DEL key on the front panel or the ERASE key on the remote control. Select the ERASE DISC?by rotating the MULTI JOG dial or pressing the SKIP key on the remote control. To cancel the operation at this point, press the ERASE/DEL or the ERASE key again. Refreshing a disc Refreshing the disc makes a disc usable again. This operation destroys all data on the disc. 1. Load the disc, and the unit in stop mode, press the ERASE/DEL key on the front panel or the ERASE key on the remote control. Select the REFRESH? rotating the MULTI JOG dial or pressing the SKIP key on the remote control. To cancel the operation at this point, press the ERASE/DEL or the ERASE key again. 2. Push the MULTI JOG dial or press the ENTER key on the remote control to enter the function. The display shows Sure? the first track and last track to be erased). Rotate the MULTI JOG dial or press the SKIP key to change the track numbers you desire to erase. To cancel the operation at this point, press the ERASE/DEL or the ERASE key again. 3. Push the MULTI JOG dial or press the ENTER key to operate the function. The display shows Sure? To cancel the operation at this point, press the STOP key. 4. Push the MULTI JOG dial or press the ENTER key again to proceed the operation. The display shows Erase flashing and the remaining time. The unit starts counting down from a time shown on the display. 5. When the tracks have been erased, Completewill appears on the display. 2. Push the MULTI JOG dial or press the ENTER key to enter the function. The display shows Sure? To cancel the operation at this point, press the STOP key. 3. Push the MULTI JOG dial or press the ENTER key again to proceed the operation. The display shows Erase flashing and the remaining time. The unit starts counting down from a time shown on the display. 4. When the disc has been erased, Completeappears then Blank Discwill appear on the display. To cancel the operation at this point, press the STOP key. 3. Push the MULTI JOG dial or press the ENTER key again to proceed the operation. The display shows Erase flashing and the remaining time. The unit starts counting down from a time shown on the display. 4. When the disc has been refreshed, Complete appears then Blank Disc will appear on the display. 29 TASCAM CD-RW900SL