TEAC CD-RW900SL CD-RW900SL Owner's Manual - Page 33

Troublshooting

Get TEAC CD-RW900SL PDF manuals and user guides View all TEAC CD-RW900SL manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

IM8P−ORRTeAfeNrTeSnAceFEaTnYdINspSeTcRiUfiCcaTItOioNnSs Troublshooting Symptom There is no power to the unit. "Disc Error!", or "OPC Error!" is displayed. Playback is not possible. No sound is output. Recording is not possible. Noise or static can be heard. The unit does not retain settings. Can't insert a disc. Possible cause and remedy Please check the power cord is properly plugged in. The disc may be dirty. Please replace the disc. This may be due to condensation. In this case, remove the disc, turn the power on and wait a few hours, then try again. • Confirm the connections with the audio system. • Check the volume level, and proper amplifier operation. • Confirm the connections with the audio system. • Adjust the recording level. • The disc may be for playback only. Please replace with a recordable disc. Please re-position the unit away from strong source of magnetism such as a television. While settings are retained each time they are made, in some case they will not be retained when the power is turned off too soon. To prevent this from happening, do not turn off the power right after making a seting. Take the disc out and press the EJECT key to reset. Then try again. Never use force to insert the disc into the slot. 33 TASCAM CD-RW900SL

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
IMPORTANT SAFETY INSTRUCTIONS
TASCAM
CD-RW900SL
²²
8 − Reference and specifications
TASCAM
CD-RW900SL
²²
Troublshooting
Symptom
Possible cause and remedy
There is no power to the unit.
Please check the power cord is properly plugged in.
“Disc Error!”, or “OPC Error!” is displayed.
The disc may be dirty. Please replace the disc.
Playback is not possible.
This may be due to condensation. In this case, remove the disc, turn the
power on and wait a few hours, then try again.
No sound is output.
• Confirm the connections with the audio system.
• Check the volume level, and proper amplifier operation.
Recording is not possible.
• Confirm the connections with the audio system.
• Adjust the recording level.
• The disc may be for playback only. Please replace with a recordable disc.
Noise or static can be heard.
Please re-position the unit away from strong source of magnetism such
as a television.
The unit does not retain settings.
While settings are retained each time they are made, in some case they
will not be retained when the power is turned off too soon. To prevent
this from happening, do not turn off the power right after making a seting.
Can’t insert a disc.
Take the disc out and press the EJECT key to reset. Then try again.
Never use force to insert the disc into the slot.