TEAC CR-H101 Owner s Mamual English - Page 12
Connecting speakers, How to connect speakers
View all TEAC CR-H101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Connecting speakers LS-101HR speakers or speakers with 4-8Ω nominal impedance VV Precautions when making connections oo After all connections are complete, connect the power cord's plug to the AC wall outlet. oo Read the instructions of each device that you intend to use with this unit. CAUTION oo When not connecting LS-101HR speakers, use speakers with 4-8Ω nominal impedance. If speakers with different impedance ratings are used, the protection circuit could operate, causing sound output to stop. oo The red speaker terminals are positive (+) and the black speaker terminals are negative (−). Generally, the + wire of the speaker cable is marked to distinguish it from the − wire of the cable. Connect the marked wire to the red + terminal and the unmarked wire to the black − terminal. oo The metal portions of the two separate wires should not touch. If they touch an electrical short might occur. Shorted wires can create a fire hazard or cause equipment failure. Never allow speaker cables to cause a short. oo Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the cables together with the AC power cord or other cables. How to connect speakers 1 Turn the terminal cap counterclockwise to loosen it. The speaker terminal caps cannot be fully removed from the unit. 2 Insert the wire into the terminal and turn the terminal cap clockwise to securely connect it. oo Make sure none of the wire insulation is under the terminal and only the bare, stripped wire is touching the terminal. 3 Confirm that the cable is fastened securely by gently pulling the cable. 12