TEAC CR-H101 Owner s Mamual English - Page 20

Basic operation (continued) Checking the timer setting Press the CLOCK button to show the current time and then the timer setting. Display example CD Timer ON Using the sleep timer This function puts the unit in standby after a set amount of time passes. Press the SLEEP button to set the amount of time (in minutes) until the unit enters standby. 30 60 90 OFF When the sleep timer is enabled, the display becomes dim. Display example CD PLAY SLEEP 25 When the sleep timer is enabled, press the SLEEP button once to show the amount of time until standby for a few seconds. Press it again to reset the time. Automatic power saving function This unit has an automatic power saving function. The operation of this function depends on the automatic power saving setting and the selected playback source. oo See "APS (automatic power saving) setting" on page 35 for how to set the automatic power saving function. When automatic power saving is on If there is no signal from the selected playback source and no operation has occurred for about 30 minutes, the unit will enter standby mode.* oo Turn the unit on again to end standby. *Power consumption in standby mode is 1 W or less. Checking whether automatic power saving is on or off When automatic power saving is on "APS ON" is shown when the unit is turned on. When automatic power saving is off "APS OFF" is shown when the unit is turned on. 20