TEAC CR-H101 Owner s Mamual English - Page 13

Using the remote control Connecting with banana plugs You can also make connections using commercially-available banana plugs. First, connect the banana plugs to the speaker cables and then connect the plugs to the terminals. oo Keep the caps tightened when in use. oo Carefully read the instructions for the banana plugs that you are using. Notice about the European model In accordance with European safety regulations, connecting banana plugs to speaker terminals is not allowed on European models. The holes into which banana plugs could be inserted have been covered with black caps. Connect speakers using bare wires or spade lugs. If a black cap should become separated from its terminal, return it to its original position. Precautions for use VV Misuse of batteries could cause them to rupture or leak leading to fire, injury or the staining of items nearby. Please read and observe the precautions on page 3 carefully. oo When using the remote control, point it toward the remote control signal receiver on the main unit from a distance of 5 m (16 ft) or less. Do not place obstructions between the main unit and the remote control. oo The remote control might not work if the remote control signal receiver on the main unit is exposed to sunlight or bright lights. In this case, try moving the main unit. oo Beware that use of this remote control could cause the unintentional operation of other devices that can be controlled by infrared rays. Installing batteries Remove the cover on the back of the remote control, and insert 2 AAA batteries into the case, aligning them with the ¥ and ^ indications. Replace the cover. Battery Replacement If the operation range of the remote control decreases, the batteries have become exhausted. In this case, replace the batteries with new ones. Dispose of the used batteries according to the instructions on them or requirements set by your local municipality. 13