TEAC CR-H101 Owner s Mamual English - Page 23

Listening to CDs Playing a CD 1 Hold the disc by its edges with the labeled side up and insert it partway. 2 Push the disc in further until just before it disappears. It will automatically be drawn in to the slot. If a disc becomes caught or is otherwise difficult to insert, do not push it in forcefully. Press the eject (-) button and remove the disc once before trying to reinsert it. (Pushing a disc forcefully could damage the unit.) 3 Press the play/pause (7/9) button. During playback, PLAY appears at the top of the display. oo If CD Auto Start is ON when a CD is loaded, the playback source will be set to CD and playback will start automatically (page 35). Pausing playback Press the play/pause (y/9) button to pause playback. To resume playback from the position where it was paused, press the play/ pause (y/9) button again. When paused, PAUSE appears at the top of the display. Stopping playback Press the stop/eject (8/-) button to stop playback. Ejecting a disc When CD playback is stopped, press the stop/eject (8/-) button. Press to partially eject the disc. Hold the disc by its edges and pull it out. oo Pressing the stop/eject (8/-) button will eject the disc regardless of the selected playback source. Skipping to search for a track Press a skip (.//) button to skip to the previous or next track. Keep pressing until you reach the track you want. oo During playback, press the . button once to return to the begin- ning of the current track. When you want to play an earlier track, press the . button repeatedly until you reach that track. oo During program playback, tracks from earlier or later in the program will be played back. 23