TEAC IF-FW/DMmkII IF-FW:DMmkII Owner's Manual - Page 26

IF-FW/DM, II & DM-Mixer Routing

Get TEAC IF-FW/DMmkII PDF manuals and user guides View all TEAC IF-FW/DMmkII manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

IF-FW/DM MKII & DM-Mixer Routing The IF-FW/DM MKII appears to the Mixer just like any other optional I/O card except that it has 32 channels of I/O instead of 8. (Note): Even if the card is currently set to 16 inputs or 16 outputs, the routing matrix will still present the full 32 channels for configuration. Mixer Outputs DM-3200 By default, the DM-3200 routes busses 1 - 16 to IF-FW/DM MKII outputs 1-16 and duplicates these to outputs 17-32. These routing settings can be changed in the OUTPUT SLOT tab of the DM-3200's ROUTING screen. Routing Control Turn the third pod under the LCD screen (POD3) to move the cursor between the IF-FW/DM MKII's 32 channel outputs, which are displayed in banks of 8 on the far left of this screen. Turn the JOG/DATA dial to change the routing and press ENTER to confirm. Use POD4 to narrow down the choices and save time when selecting a source for each output. If the BUSS #/DIR # output is selected, then the direct output from a DM-4800 channel input can be easily selected by turning on Direct Out on the channel input - use the "DIRECT" key in the front panel "OUTPUT ASSIGN" section. 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
26
IF-FW/DM
MK
II & DM-Mixer Routing
The IF-FW/DM
MK
II appears to the Mixer just like any other
optional I/O card except that it has 32 channels of I/O instead of 8.
(Note): Even if the card is currently set to 16 inputs or 16
outputs, the routing matrix will still present the full 32
channels for configuration.
Mixer Outputs
DM-3200
By default, the DM-3200 routes busses 1 – 16 to IF-FW/DM
MK
II
outputs 1-16 and duplicates these to outputs 17-32.
These routing settings can be changed in the
OUTPUT SLOT
tab
of the DM-3200’s
ROUTING
screen.
Routing Control
Turn the third pod under
the LCD screen (POD3)
to move the cursor
between the IF-FW/DM
MK
II’s 32 channel
outputs, which are
displayed in banks of 8 on
the far left of this screen.
Turn the JOG/DATA dial
to change the routing and
press ENTER to confirm.
Use POD4 to narrow down the choices and save time when
selecting a source for each output.
If the BUSS #/DIR # output is selected, then the direct output from
a DM-4800 channel input can be easily selected by turning on
Direct Out on the channel input – use the “DIRECT” key in the
front panel “OUTPUT ASSIGN” section.