TEAC IF-FW/DMmkII IF-FW:DMmkII Owner's Manual - Page 27
Mixer Inputs
View all TEAC IF-FW/DMmkII manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
DM-4800 By default, the DM-4800 puts busses 1-24 on IF-FW/DM MKII outputs 1-24 and duplicates busses 1 - 8 on outputs 25-32. These routing settings can be changed in the OUTPUT SLOT tab of the DM-4800's ROUTING screen. Routing control is identical to the DM-3200 described above. Mixer Inputs DM-3200 The IF-FW/DM MKII's mixer inputs are configured from the INPUT tab of the mixer's ROUTING screen. (Note) By default, there are no option card signals routed into the mixer. Routing Control Use POD 3 to select a page of inputs, use the arrow keys to navigate around the inputs. Use the jog/dial to select an input and press ENTER to confirm it. Use POD 4 to choose a sub-set of the available inputs. Use the Batch routing area at the bottom of the screen to route blocks of 8 at a time for speed. Don't forget to press ENTER. 27