TEAC PD-D2610mkII PD-D2610MKII Owner s Manual EFS - Page 14
Programed Playback, To check the programed order
View all TEAC PD-D2610mkII manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Programed Playback 2 3 14 5 < Up to 32 tracks can be programed in the desired order. 1 Press the PROGRAM button in the stop mode. 3 Press the PROGRAM button to enter your selection. Repeat steps 2 to 3 to program more tracks/files. < If you made a mistake, press the CLEAR button. The last programed number will be deleted. < Up to 32 tracks/files can be programed. 4 When programing has been finished, press the PLAY button to start programed playback. "PROGRAM" lights on the display. 2 Press the numeric button to select a track or file. When playback of all the programed tracks has finished, or if one of the following buttons is pressed, the programed playback stops: STOP But the programed contents aren't lost. You can return to the programed playback by pressing the PLAY button. < If the power is turned off, the programed contents will be erased. < When in the program mode, the following buttons don't work: SHUFFLE, INTRO track/file number disc number program number You can also use the SKIP buttons (.//) to select a track. < If the unit has not yet detected the contents of the disc, you can not enter 3-digit numbers with the numeric buttons. In this case use the SKIP buttons (.//). < You can not also enter numbers other than those detected as specifying tracks/files in the disc. To check the programed order In the stop mode, press the PROGRAM CHECK button repeatedly. The track and program numbers will be shown on the display. 14