TEAC SR-80i SR-80i Manual - Page 28
Sleep Timer, Troubleshooting, General, iPod/iPhone Player, USB Player
View all TEAC SR-80i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Sleep Timer Troubleshooting You can set the sleep timer so that the unit turns itself off after a specified amount of time. If you a have problem with your system, read this page and try to solve the problem yourself before calling your dealer or a TEAC service Center. Each time the SLEEP button is pressed, the time is changed at 15 minute intervals. The unit will automatically will be turned off when the time elapses. 90 min 75 min 60 min 45 min 30 min 15 min OFF o During the sleep timer is activated, the display is dimmed and "S" lights. < If you want to check the remaining time, press the SLEEP button once. The remaining time is displayed for a few seconds. During the remaining time display, if you press the SLEEP button again, the sleep timer will be canceled. o This operation is available in every sound source. General No power e Check the connection to the AC power supply. Check whether or not the AC source is a switched socket. If it is, confirm that the switch is turned on. e Confirm that there is power to the AC wall socket by plugging another item such as a lamp or fan into it. No sound from the speakers. e Select the source by pressing the FUNCTION button. e Adjust the volume. e If "Muting" lights, press the MUTING button. The sound is noisy. e The unit is too close to a TV or similar device. Relocate it away from the interfering device or turn it off. The remote control does not work. e If the battery is exhausted, replace it with a new one. e Use the remote control unit within the operation range (16ft / 5 m) and point it at the remote sensor on the front panel. e Remove obstacles between the remote control unit and the main unit. e If a bright light is near the unit, turn it off. iPod/iPhone Player Cannot connect the iPod/iPhone. e Remove dust or obstacles from the dock connector of SR-80i and the iPod/iPhone, then connect the iPod/ iPhone again. Cannot operate the iPod/iPhone. e Release the iPod/iPhone HOLD switch. Cannot play. e Remove the iPod/iPhone from the dock, wait a few seconds, then connect it again. e A software update might solve the problem. Visit the Apple website and download the latest iPod/iPhone software. USB Player Will not play. e Confirm that there are MP3/WMA files on the USB flash memory. 28