TEAC US-2000 Cubase LE5 Quick Start Guide - Page 11

Q4. I tried to mix down a threeminute song, but could mix only ten seconds. A4. Make sure that the region specified by the left and right locators is set to three minutes or longer. Q5. I cannot set the locator region to more than ten minutes. A5. The default setting is ten minutes. From the Project menu, choose Project Setup and then change the Length field. Q6. I burned a CD using the WAV file I mixed down, but the speed is obviously different. A6. Could the sampling rate of your project be set to 48 kHz? If your ultimate objective is to create a CD, TASCAM recommends that the sampling rate be set to 44.1 kHz from the beginning. To specify the sampling rate, choose Project Settings from the Project menu, then set the sampling rate to 44.100 kHz. Q7. I have connected an audio source to the Unit, but cannot hear anything. A7. Make sure that the input level of the audio interface is raised appropriately. When a signal is being input, the signal indicator of the audio interface will light up green. Make sure that the monitor (or headphone) level is raised, and that the connections are correct. TASCAM Cubase LE 5 11