TEAC US-2000 Cubase LE5 Quick Start Guide - Page 8
Recording
 |
View all TEAC US-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Recording 1 Select the track that you want to record to, and set the input bus in the Input Routing field on the left side of the window. 2 After you have completed setting the input buses for every track, click the Record Enable buttons (making them red) for the tracks that you want to record on. Press the Monitor button if you want to hear the input signal. 3 Press the (REC) button in the transport section to start recording. 4 When you finish recording, press the (STOP) button, then click the Record Enable buttons to turn it off (the button indicator will turn off). Rewind if necessary. 5 Repeat steps 1-4 to overdub additional tracks. 8 TASCAM Cubase LE 5
-
1 -
2
-
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12
 |
 |
8
TASCAM
Cubase LE 5
Recording
1 Select the track that you want to
record to, and set the input bus in the
Input Routing field on the left side of
the window.
Press the Monitor button if you want
to hear the input signal.
2 After you have completed setting the
input buses for every track, click the
Record Enable buttons (making them
red) for the tracks that you want to
record on.
3 Press the (
REC
) button in the
transport section to start recording.
4 When you finish recording, press
the (
STOP
) button, then click the
Record Enable buttons to turn it off
(the button indicator will turn off).
Rewind if necessary.
5 Repeat steps 1-4 to overdub
additional tracks.