TEAC W-860R Owners Manual - Page 13

ENGLISH Synchro Reverse Dubbing The SYNC REV button reverses both decks at exactly the same time during dubbing. This function is convenient when the lengths of tapes are different. 1. Set the tape running direction of both decks to the Á (forward) direction, and set the REV MODE switch to the Ë position. ï Ë ä 2. Press the SYNC REV button (the indicator will light). 3. Press the DUB START button (HIGH or NORMAL). 4. To stop dubbing, press the STOP button of TAPE I or TAPE II. Notes: ... Synchro Reverse Dubbing mode can be entered only when the REV MODE switch is in the Ë position and the direction indicators of both TAPE I and TAPE Il are Á. ... If the original tape is shorter than the dubbed tape, blank sections will be left at both ends of the dubbed tape. To prevent this, use tapes with the same length as far as possible. TAPE I shorter than TAPE II Tape I (Playback) Play 1 Play 3 Reverse 2 Tape II (Recording) No Signal Recording Recording 1 Reverse 2 Recording 3 ➀ When TAPE I reaches the end of the forward side, TAPE I stops and TAPE II enters the "no signal recording" mode. ➁ When TAPE II reaches the end, both TAPE I and ll are reversed simultaneously. TAPE l starts reverse play and TAPE II resumes recording. ➂ When TAPE I reaches the end of the reverse side, both TAPE I and ll stop simultaneously. TAPE I longer than TAPE II Tape I (Playback) Play 1 Play 3 Reverse 2 Tape II (Recording) Recording 1 No Recording Reverse 2 Recording 3 ➀ When TAPE II reaches the end of forward side, TAPE Il enters the record-pause mode, while TAPE I continues playback. ➁ When TAPE I reaches the end, TAPE I starts reverse play and TAPE II starts recording . ➂ When TAPE Il reaches the end of the reverse side, both TAPE I and ll stop simultaneously. 13