TEAC W-890RmkII-B Manual for W-890R - Page 12
Playback II (either TAPE I or TAPE II), Pitch control TAPE
View all TEAC W-890RmkII-B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Playback Playback II (either TAPE I or TAPE II) E Pitch control (TAPE I deck only) This control varies the pitch of the music during playback (This control does not work during recording or dubbing). A To stop playback, press the STOP (H) key. B To stop playback temporarily, press the PAUSE key. To resume playback, press the PAUSE key again, or press the PLAY (h or y) key. While playback is paused, pressing the PLAY key whose direction is opposite to the indicator (h or y) on the display, will switch the playback direction. This does not release the pause function. Press PAUSE or the same play key (h or y) again to start playback on the other side of the tape. C Fast forward/Rewind Press the m or , key while in stop mode to fast wind the tape. Turning the PITCH CONTROL knob clockwise increases the playback speed and raises the pitch up to +10%. Turning the PITCH CONTROL knob counterclockwise reduces the playback speed and lowers the pitch by a maximum of -10%. F To listen through headphones WARNING There is no level control for the headphones output. Beware that sudden loud sounds may occur depending on recorded material. You should avoid prolonged exposure to high volume sound as this can damage your hearing. Plug your headphones into the PHONES jack, and put on the headphones. Plugging into the PHONES jack does not disable the line outputs. To stop the fast winding tape, press the STOP (H) key. D Tape counter Press the COUNTER RESET key to reset the tape counter to . You can use this function for easy relocation of any desired point on the tape. 12