TP-Link RPS150 RPS150 V1 IG - Page 9

Redundant Power Supply CCCCCCCCCC Installation 2222 Package Contents Make sure that the package contains the following items. If any of the listed items is damaged or missing, please contact your distributor. One RPS150 One DC Power Cord and one AC Power Cord This Installation Guide RPS150 RPS2 Four fittings 2222 Safety Precautions To avoid any device damage and bodily injury caused by improper use, please observe the following rules: ■■ Safety Precautions ■■ Keep the power off during the installation. Wear an ESD-preventive wrist strap, and make sure that the wrist strap has a good skin contact and is well grounded. ■■ Make sure that the input AC power voltage matches the specifications indicated on the rear panel of the RPS150. ■■ Before switching on the power, make sure that the power circuit will not be overloaded, otherwise the RPS150 will work abnormally or be damaged. ■■ Do not open or remove the cover of the RPS150, even if it is not electrified. ■■ Before cleaning the device, cut off the power supply. Do not clean it by the waterish cloth, and never use any other liquid cleaning method. ■■ Site Requirements To ensure normal operation and long service life of the device, please install it in an environment that meets the requirements described in the following subsection. Installation 04