TP-Link T1600G-18TSTL-SG2216 T1600G-18TSUN V1 Configuration Guide - Page 165

Managing MAC Address Table Security Configurations Follow these steps to configure MAC notification traps: 1) In the MAC Notification Global Config section, enable this feature, configure the relevant options, and click Apply. Global Status Enable MAC notification feature globally. Table Full Notification Enable Table Full Notification, and when address table is full, a notification will be generated and sent to the management host . Notification Interval Specify a time value in seconds between 1 to 1000 to bundle the notifications and reduce traffic. Notification Interval is the interval time between each set of New MAC Learned notifications that are generated. By default, it is 1 second. 2) In the MAC Notification Port Config section, select your desired port and enable its notification traps. You can enable these three types: Learned Mode Change, Exceed Max Learned and New MAC Learned. Click Apply. Learned Mode Change Enable Learned Mode Change, and when the learned mode of the specified port is changed, a notification will be generated and sent to the management host. Exceed Max Learned Enable Exceed Max Learned, and when the maximum number of learned MAC addresses on the specified port is exceeded, a notification will be generated and sent to the management host. For Exceed-max-learned notification, you need to enable Port Security and set the maximum number of learned MAC addresses on the specified port. For more information about Port Security, please refer to Managing Physical Interfaces. New MAC Learned Enable New MAC Learned, and when the specified port learns a new MAC address, a notification will be generated and sent to the management host. 3) Configure SNMP and set a management host. For detailed SNMP configurations, please refer to Configuring SNMP & RMON. Configuration Guide 142