TP-Link T1600G-18TSTL-SG2216 T1600G-18TSUN V1 Configuration Guide - Page 600

Configuring Network Security 802.1X Configuration 6.1.3 Configuring 802.1X on Ports Choose the menu Network Security > 802.1X > Port Config to load the following page. Figure 6-8 Port Config Configure 802.1X authentication on the desired port and click Apply . Status Enable 802.1X authentication on the port. Guest VLAN Select whether to enable Guest VLAN on the port. Control Mode Select the Control Mode for the port. By default, it is Auto. Auto: If this option is selected, the port can access the network only when it is authenticated. Force-Authorized: If this option is selected, the port can access the network without authentication. Force-Unauthorized: If this option is selected, the port can never be authenticated. Control Type Select the Control Type for the port. By default, it is MAC Based. MAC Based: All clients connected to the port need to be authenticated. Port Based: If a client connected to the port is authenticated, other clients can access the LAN without authentication. Authorized Displays whether the port is authorized or not. LAG Displays the LAG the port belongs to. Configuration Guide 577