TP-Link T1600G-18TSTL-SG2216 T1600G-18TSUN V1 Configuration Guide - Page 551

Configuring ACL ACL Configurations The following example shows how to create Policy RD, and apply ACL 600 to Policy RD: Switch#configure Switch(config)#access-list policy name RD Switch(config)#access-list policy action RD 600 Switch(config-action)#exit Switch(config)#show access-list policy RD Policy name : RD access-list 600 Switch(config)#end Switch#copy running-config startup-config 2.2.3 ACL Binding and Policy Binding You can select ACL binding or Policy binding according to your needs. An ACL Rule and Policy takes effect only after they are bound to a port or VLAN.  ACL Binding You can bind the ACL to a port or a VLAN. The received packets will then be matched and processed according to the ACL rules. Step 1 configure Enter global configuration mode Step 2 interface {fastEthernet port | range fastEthernet port-list | gigabitEthernet port | range gigabitEthernet port-list} access-list bind acl acl-id (Optional) Enter the interface configuration mode and bind the ACL to the port. port | port-list: The port (ports) to which the policy will bind. policy-name: The name of the policy. Step 3 interface vlan vlan-id access-list bind acl acl-id (Optional) Enter layer 3 interface configuration mode and bind the ACL to the VLAN. vlan-id: The VLAN to which the policy will bind. acl-id: The ID number of the ACL. show access-list bind (Optional) View the configuration of binding. Configuration Guide 528