Home » TP-Link Manuals » Hubs & Switches » TP-Link TL-SG2224WEB » Manual Viewer

TP-Link TL-SG2224WEB User Guide - Page 63

MTU VLAN Setting

UPC - 845973020460

View all TP-Link TL-SG2224WEB manuals

Add to My Manuals
Save this manual to your list of manuals

Page 63 highlights

TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide 4) If the port is connected to a device that doesn't support IEEE802.1Q (e.g. HUB and some network adapter), value of the Egress Frame field should be set to "Drop Tag". 5) For the first time the Port VLAN mode is set, a default VLAN, which is indexed as NO. 1 and contains all switch ports, will be built up. 6) The ports haven't been assigned to any VLAN manually cannot communicate with each other or other VLAN. That's different from the Port VLAN. 7) The number of Port VLAN can be set depends on the switch type. See the Appendix C for details. 5.3.4.5 MTU VLAN Setting This page, which is designed to configure the uplink port, display when the switch is in MTU VLAN mode. Figure 5-38 MTU VLAN Setting Notice: 1) The uplink port will buildup several VLANs with each of the other ports. Each VLAN contains two ports, the uplink port and one of the other ports in the switch, so the uplink port can communicate with any other port but other ports can't communicate with each other. 2) The first time the MTU VLAN mode is set, it set port 1 to be the uplink port by default. 56

Section	Page
Package contents	8
Chapter 1: Introduction	9
1.1 Intended Audience	9
1.2 Agreement	9
1.3 Guide Overview	9
Chapter 2: Device Description	11
2.1 Introduction to the Device	11
2.2 Features and Technical Specifications	11
2.2.1 Features	11
2.2.2 Technical Specifications	12
Chapter 3: Mounting Device	14
3.1 Install the Device	14
3.1.1 Desktop or Shelf Installation	14
3.1.2 Rack Installation	14
3.1.3 AC Power	15
3.2 Switch Aspect Description	15
3.2.1 Front Panel	15
3.2.2 Back Panel	16
3.2.3 SFP Module	17
3.3 Note	17
Chapter 4: Function Description	18
4.1 System Setting	18
4.1.1 System Information	18
4.1.2 File Transfer	18
4.1.3 Reboot & Reset	18
4.1.4 User	19
4.2 Port Setting	19
4.2.1 Port Parameter	19
4.2.1.1 Duplex Mode	19
4.2.1.2 Flow Control	19
4.2.1.3 Port Security	19
4.2.2 Port Statistic and Port Status	20
4.2.3 Storm Control	20
4.2.4 Port Description	20
4.3 Network Setting	21
4.3.1 Switch IP Address	21
4.3.2 Aging Time and Dynamic Address Table	22
4.3.3 Static MAC Address Table	22
4.3.4 Filtering MAC Address Table	23
4.3.5 Dynamic Binding	23
4.3.6 Ping	24
4.4 VLAN Setting	24
4.4.1 VLAN Mode	24
4.5 Port Trunking	26
4.6 Priority Setting	26
4.6.1 Priority Mode	26
4.6.2 Port-Based Priority	27
4.6.3 Port Default Priority	27
4.6.4 802.1p Priority	27
4.7 Port Mirroring	27
4.8 Virtual Cable Test	27
Chapter 5: WEB Management	29
5.1 Overview	29
5.2 Connecting to the Device	29
5.2.1 Getting Started	29
5.2.2 Login the Switch	33
5.3 Setting the Device	33
5.3.1 System Setting	37
5.3.1.1 System Information	37
5.3.1.2 File Transfer	38
5.3.1.3 Reboot & Reset	39
5.3.1.4 User	40
5.3.2 Port Setting	40
5.3.2.1 Port Parameter	40
5.3.2.2 Port Statistic	43
5.3.2.3 Port Status	45
5.3.2.4 Storm Control	46
5.3.2.5 Port Description	47
5.3.3 Network Setting	48
5.3.3.1 Switch IP Address	48
5.3.3.2 Static MAC Address	49
5.3.3.3 Filtering MAC Address	51
5.3.3.4 Dynamic Binding	52
5.3.3.5 Bound MAC Address	55
5.3.3.6 Aging Time	56
5.3.3.7 Ping	57
5.3.4 VLAN Setting	57
5.3.4.1 VLAN Mode	57
5.3.4.2 Port VLAN Setting	58
5.3.4.3 Tag VLAN Global Setting	60
5.3.4.4 Tag VLAN Setting	61
5.3.4.5 MTU VLAN Setting	63
5.3.5 Port Trunking	64
5.3.6 Priority Setting	64
5.3.6.1 Priority Mode	65
5.3.6.2 Port-Based Priority	65
5.3.6.3 Port Default Priority	66
5.3.6.4 802.1p Priority Class	66
5.3.7 Port Mirroring	67
5.3.8 Virtual Cable Test	68
Appendix A Pin Explain For RJ-45 Connector	70
Appendix B Table of Factory Defaults	72