Home » TP-Link Manuals » Hubs & Switches » TP-Link TL-SG2224WEB » Manual Viewer

TP-Link TL-SG2224WEB User Guide - Page 68

Virtual Cable Test

UPC - 845973020460

View all TP-Link TL-SG2224WEB manuals

Add to My Manuals
Save this manual to your list of manuals

Page 68 highlights

TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide  Mirror Mode: You can set the mirror mode to monitor the ingress traffic, egress traffic, or both traffic. You can also disable the port mirroring.  Mirror Port: Defines the port to monitor the traffic, Trunk member can't define here.  Mirrored Port: Indicates the port from which the packets are mirrored, Trunk member can't define here. At most 4 ports can be mirrored simultaneously.  Clean Up: Clean Up the Mirrored Port list. Notice: 1) Trunk member port can be neither Mirror Port nor Mirrored Port. 2) The Mirror Port can't be the Mirrored Port at the same time. 3) At most 4 Mirrored Ports can be set. 4) If a 100M SFP module is installed,it can't be the Mirror Port.If it has been configured as the Mirror Port before,please modify it. 5.3.8 Virtual Cable Test The virtual cable test feature lets you test the continuity of the cable circuit. It contains the following fields: Figure 5-45 Virtual Cable Test  Test Port: Select the port you want to test. 61

Section	Page
Package contents	8
Chapter 1: Introduction	9
1.1 Intended Audience	9
1.2 Agreement	9
1.3 Guide Overview	9
Chapter 2: Device Description	11
2.1 Introduction to the Device	11
2.2 Features and Technical Specifications	11
2.2.1 Features	11
2.2.2 Technical Specifications	12
Chapter 3: Mounting Device	14
3.1 Install the Device	14
3.1.1 Desktop or Shelf Installation	14
3.1.2 Rack Installation	14
3.1.3 AC Power	15
3.2 Switch Aspect Description	15
3.2.1 Front Panel	15
3.2.2 Back Panel	16
3.2.3 SFP Module	17
3.3 Note	17
Chapter 4: Function Description	18
4.1 System Setting	18
4.1.1 System Information	18
4.1.2 File Transfer	18
4.1.3 Reboot & Reset	18
4.1.4 User	19
4.2 Port Setting	19
4.2.1 Port Parameter	19
4.2.1.1 Duplex Mode	19
4.2.1.2 Flow Control	19
4.2.1.3 Port Security	19
4.2.2 Port Statistic and Port Status	20
4.2.3 Storm Control	20
4.2.4 Port Description	20
4.3 Network Setting	21
4.3.1 Switch IP Address	21
4.3.2 Aging Time and Dynamic Address Table	22
4.3.3 Static MAC Address Table	22
4.3.4 Filtering MAC Address Table	23
4.3.5 Dynamic Binding	23
4.3.6 Ping	24
4.4 VLAN Setting	24
4.4.1 VLAN Mode	24
4.5 Port Trunking	26
4.6 Priority Setting	26
4.6.1 Priority Mode	26
4.6.2 Port-Based Priority	27
4.6.3 Port Default Priority	27
4.6.4 802.1p Priority	27
4.7 Port Mirroring	27
4.8 Virtual Cable Test	27
Chapter 5: WEB Management	29
5.1 Overview	29
5.2 Connecting to the Device	29
5.2.1 Getting Started	29
5.2.2 Login the Switch	33
5.3 Setting the Device	33
5.3.1 System Setting	37
5.3.1.1 System Information	37
5.3.1.2 File Transfer	38
5.3.1.3 Reboot & Reset	39
5.3.1.4 User	40
5.3.2 Port Setting	40
5.3.2.1 Port Parameter	40
5.3.2.2 Port Statistic	43
5.3.2.3 Port Status	45
5.3.2.4 Storm Control	46
5.3.2.5 Port Description	47
5.3.3 Network Setting	48
5.3.3.1 Switch IP Address	48
5.3.3.2 Static MAC Address	49
5.3.3.3 Filtering MAC Address	51
5.3.3.4 Dynamic Binding	52
5.3.3.5 Bound MAC Address	55
5.3.3.6 Aging Time	56
5.3.3.7 Ping	57
5.3.4 VLAN Setting	57
5.3.4.1 VLAN Mode	57
5.3.4.2 Port VLAN Setting	58
5.3.4.3 Tag VLAN Global Setting	60
5.3.4.4 Tag VLAN Setting	61
5.3.4.5 MTU VLAN Setting	63
5.3.5 Port Trunking	64
5.3.6 Priority Setting	64
5.3.6.1 Priority Mode	65
5.3.6.2 Port-Based Priority	65
5.3.6.3 Port Default Priority	66
5.3.6.4 802.1p Priority Class	66
5.3.7 Port Mirroring	67
5.3.8 Virtual Cable Test	68
Appendix A Pin Explain For RJ-45 Connector	70
Appendix B Table of Factory Defaults	72