TP-Link TL-WR940N User Guide - Page 12
TL-WR940N, Factory Defaults, System Tools - reset
UPC - 845973051464
View all TP-Link TL-WR940N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
TL-WR940N Wireless N Router There are two ways to reset to the Router's factory defaults: 1) Use the Factory Defaults function on System Tools -> Factory Defaults page in the Router's Web-based Utility. 2) Use the Factory Default Reset button: Press the Reset button for five seconds and then wait for the Router to reboot. ¾ WAN: This WAN port is where you will connect the DSL/cable Modem, or Ethernet. ¾ 1,2,3,4 (LAN): These ports (1, 2, 3, 4) connect the Router to the local PC(s). ¾ Wireless antenna: To receive and transmit the wireless data. -5-
TL-WR940N
Wireless N Router
There are two ways to reset to the Router's factory defaults:
1)
Use the
Factory Defaults
function on
System Tools
->
Factory Defaults
page in the
Router's Web-based Utility.
2)
Use the Factory Default Reset button: Press the Reset button for five seconds and then
wait for the Router to reboot.
¾
WAN:
This WAN port is where you will connect the DSL/cable Modem, or Ethernet.
¾
1,2,3,4 (LAN):
These ports (1, 2, 3, 4) connect the Router to the local PC(s).
¾
Wireless antenna:
To receive and transmit the wireless data.
-5-