Thermador VCIN36JP User Manual - Page 10
Lights, Heat Sensor
View all Thermador VCIN36JP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Lights This button controls the halogen lighting. The first press turns the lights on. A second press dims the lights. A third press turns the lights off. 1 - ON 2 - DIM 3 - OFF Heat Sensor (custom insert control panel only) Heat sensor feature is disabled if a remote control is installed. Over-temperature Condition The high temperature sensor protects the hood from high temperatures which may damage components. The control is set to activate at 161 °F (72 °C) and reset at 140 °F (60 °C). When activated, the blower will turn on low and the corresponding LED will blink, indicating an overtemperature condition. While the high temperature sensor is activated, the blower speed can be changed or turned off. If the blower is turned off, the corresponding LED will blink. Light controls will remain operational. When the control sensor reaches 140°F (60°C), a reset will occur. During reset, the control will revert back to the operational state prior to the high temperature condition. High Temperature Fault Condition The circuit is equipped with an alarm indicating that the heat sensor protection is not working due to a damaged sensor. In the case of this extreme condition, the three fan speed indicator LEDs will start blinking. All the controls will be operational except for the speed indicators. English 5