Thermador VCIN36JP User Manual - Page 12

Maintenance Lights Halogen Light Replacement Turn off the lights and blower. Allow the lights to cool before handling. If new lights do not operate, be sure lights are inserted correctly before calling for service. CAUTION: Turn power off at breaker before removing a damaged bulb. Do not touch the bulbs immediately after use. The bulbs will remain hot for several minutes. Bulb Lens WARNING: • Make sure the appliance and the lights are cool and power to the appliance has been turned off before replacing the light bulb(s). Failure to do so could result in electrical shock or burns. • The lenses must be in place when using the appliance. • The lenses serve to protect the light bulb from breaking. • The lenses are made of glass. Handle carefully to avoid breaking. Broken glass can cause an injury. Figure 5: Halogen Light Replacement 1. Using a flat edge from a screwdriver or equivalent tool, pry loose the lens cover, as shown in Figure 5. 2. Pull damaged bulb straight out from the socket to remove. 3. Replace with a new 120 V, 40W (maximum) bulb with G-9 base. Press pins in bulb base straight into socket until fully seated. Follow package directions and do not touch new light with bare hands, the oils from your skin can reduce the longevity of the bulb. 4. Reinstall the light and cover. English 7