Toshiba 52HMX84 Owner's Manual - English - Page 61
Warning, Warning: Risk Of, Electric Shock, Caution: Hot Surface, Risk
UPC - 022265262139
View all Toshiba 52HMX84 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Introduction Connecting your TV Using the Remote Control How to replace the lamp unit Required tool: Manual Phillips screwdriver; gloves. Optional tool: 5/32" or 4mm Allen wrench. 1. Turn off the TV and unplug the power cord. WARNING: Eye damage may result from directly viewing the light produced by this lamp. Always turn off the TV and unplug the power cord before opening the lamp unit door. 2. STOP! Allow the lamp to cool for at least one (1) hour before replacing it. CAUTION: HOT SURFACE The temperature of the lamp immediately after use exceeds 392˚F (200˚C). Touching the lamp before it has cooled will result in severe burns. ALLOW THE LAMP TO COOL FOR AT LEAST ONE (1) HOUR BEFORE REPLACING IT. 3. On the lamp unit door on the side of the TV, loosen the thumb screw by hand or by using a 5/32" or 4mm Allen wrench, and then remove the lamp unit door. TV back WARNING: RISK OF ELECTRIC SHOCK! TO REDUCE THE RISK OF ELECTRIC SHOCK, NEVER REMOVE TV COVERS, EXCEPT AS SPECIFIED HEREIN. REFER ALL SERVICING NOT SPECIFIED IN THIS MANUAL TO QUALIFIED SERVICE PERSONNEL. Failure to follow this WARNING may result in death or serious injury. Lamp unit door detail Thumb screw WARNING: RISK OF ELECTRIC SHOCK! The lamp unit door is provided with an interlock to reduce the risk of electric shock and excessive ultraviolet radiation. Never defeat its purpose or attempt to service without removing the lamp unit door completely. Failure to follow this WARNING may result in death or serious injury. 4. Using a manual Phillips screwdriver, loosen the two screws on the lamp unit. Setting up your TV Using the TV's Features Appendix Index Lamp unit screws (Continued on next page) 61