Toshiba 62MX195 Owner's Manual - English - Page 94

Chapter 8: Using the TV's features Using the PC setting feature You can adjust the horizontal position/size, vertical position/size, clock phase, and sampling clock. This feature will be grayed out on the menu unless there is a PC connected to the TV (See "Connecting a personal computer (PC)" on page 29.) To set the PC setting: 1. Confirm a PC is connected (see "Connecting a personal computer (PC)" on page 29). 2. Repeatedly press INPUT to select PC input mode. (See Selecting the video input source to view " on page 72.) 3. Press MENU and open the Setup menu. 4. Highlight PC Settings and press ENTER. Setup Installation Sleep Timer On/Off Timer PC Settings HDMI 1 Audio HDMI 2 Audio Slide Show Interval Auto Auto 2 Sec Navigate Select CH RTN Back EXIT Exit 5. Press y or z to highlight the item you want to adjust. 6. Press x or • to make the appropriate adjustments. PC Settings Horizontal Position Horizontal Width Vertical Position Vertical Height Clock Phase Sampling Clock Reset 0 0 0 0 0 0 Done • Horizontal Position/Vertical Position: Adjusts picture left/right and up/down. The adjustment range is within ±5 from center. (The adjustable range may vary depending on the input mode.) • Horizontal Width/Vertical Hegiht: Adjusts picture width of Horizontal and picture height of Vertical. The adjustment range is within ±5 from center. • Clock Phase: This function is to reduce noise and sharpen the picture. The adjustment range is within ±15 from center. • Sampling Clock: This function is to minimize periodic vertical stripes on the screen. The adjustment range is within ±15 from center. 94 Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.