Toshiba HDNB120XKEG1 Canivo Personal Cloud User Manual (English) - Page 9

Canvio® Personal Cloud Hardware Features Front View The Canvio® Personal Cloud has a set of LEDs which are used as optical indicators to reflect the available storage capacity and the condition of the Canvio® Personal Cloud. The LEDs are numbered from #1 to #5 (beginning from the bottom to the top). Colors • LEDs #1 thru #4 are white. • LED #5 is amber. Power Status • On: LED #1 is steady on • Active: LED #1 flashes on and off with drive activity • Low-power (sleep) mode: LED #1 will flash slowly (1 second on and 2 seconds off) Filled Storage Capacity (Fill Gauge) Fill Gauge (range in percentage) Corresponding LED(s) lit Less than 30% #1 30% - 50% #1, #2 50% - 70% #1, #2, #3 70% - 90% #1, #2, #3, #4 More than 90% #1, #2, #3, #4, #5 Timer-controlled HDD Sleep Mode By default, the Canvio® Personal Cloud Hard Disk Drive (HDD) sleep mode feature is not enabled. 1. To enable this feature, click SETTINGS. (Refer to the To View the Canvio® Personal Cloud Information). 2. Under ENABLE HDD STANDBY, move the switch to ON. This will save the power used by the Canvio® Personal Cloud and is a recommended setting if you will not be accessing the device frequently. After 10 minutes of inactivity, the HDD will enter into sleep mode. If the device is in sleep mode, it will take up to 30 seconds to wake up and respond to the first request. It will respond normally to subsequent requests, until the next period of 10 minutes of inactivity. Copyright © 2012 Toshiba 9