Toshiba P105-S9337 Toshiba Online Users Guide for Satellite P105 - Page 69
Directing the display output when you turn on the computer - video
UPC - 032017779440
View all Toshiba P105-S9337 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Getting Started Using external display devices 69 3 Turn on the external device. 4 Set the display mode by pressing Fn + F5, or by configuring the Display Properties settings. Directing the display output when you turn on the computer Once you have connected an external display device, you can choose to use the internal display only, the external device only, or both simultaneously. The quickest way to change the display output settings is to use the display hot key (Fn + F5): 1 Press Fn and F5 simultaneously. 2 While holding down Fn, press F5 repeatedly until the setting you want takes effect. Briefly pause each time you press the F5 key to allow time for the display to change. This hot key cycles through the settings in the following order: ❖ Built-in display only ❖ Built-in display and external monitor simultaneously ❖ External monitor only ❖ TV ❖ TV and built-in display ❖ DVI appears if you have a projector or a monitor connected to the DVI video port (DVI is available on some models)