Toshiba PA3686U-1SET dynadock wireless User Manual - Page 24
Connect the dynadock™ to your computer
View all Toshiba PA3686U-1SET dynadock wireless manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
24 Setting Up the dynadock™ and Connecting Peripherals Setting up the dynadock™ Connect the dynadock™ to your computer You may either: ❖ Set up a wireless connection OR ❖ Set up a USB cable connection Refer to the appropriate section below for the type of connection you wish to establish. Set up a wireless connection NOTE To set up a wireless connection, you will need either a Certified Wireless USB adaptor (included with certain models) or a computer with integrated Certified Wireless USB functionality. If you are not using a Toshiba adaptor or if your computer has integrated Certified Wireless USB functionality, please refer to the documentation provided with your adaptor or computer for instructions on setting up a wireless connection, instead of following the steps below. To set up a wireless connection: 1 Flip the dynadock™'s antennas into the upright position. (Sample Illustration) dynadock™'s antennas in the upright position 2 Make sure the antenna switch on the back of the dynadock™ is set to the (down) position.