Toshiba PA3686U-1SET dynadock wireless User Manual - Page 31
Connecting USB devices, This provides basic instructions for connecting most USB
View all Toshiba PA3686U-1SET dynadock wireless manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Setting Up the dynadock™ and Connecting Peripherals 31 Connecting your peripherals When your computer is docked, the audio ports on the computer are automatically disabled and the audio ports on the dynadock™ are automatically enabled. In most cases, simply connect your audio device to the appropriate port on the dynadock™ and the port is ready to use. To do any one of the following, please see the referenced section: ❖ To use the computer's audio ports (instead of the dynadock's audio ports) when the computer is docked, please see "Configuring audio ports" page 50. ❖ To enable virtual 7.1-channel sound on your connected audio device, please see "Enhancing sound quality" page 52. This will provide better sound quality over standard stereo output. ❖ To use the dynadock's S/PDIF jack, please see "Enabling digital S/PDIF output" page 55. NOTE If you switch between the computer's audio ports and the dynadock's audio ports, you may have to restart your media player if it is running. Connecting USB devices The dynadock™ provides six USB 2.0 ports: four on the back and two on the front. To locate the USB ports on the dynadock™, please see the "Quick Tour" page 14. This section provides basic instructions for connecting most USB devices to the dynadock™. Please check the documentation that came with your USB device for any special instructions. NOTE You do not need to turn off the dynadock™ or the docked computer before connecting a USB device. To connect a USB device to the dynadock™: 1 If your device came with its own AC adaptor, connect the AC adaptor to the device and to a live electrical outlet. 2 Use a USB cable to connect the device to one of the USB ports on the dynadock™.