Toshiba PA3686U-1SET dynadock wireless User Manual - Page 40
Disable/Enable pop-up messages, Change/Select the channel used for radio communication, Options
View all Toshiba PA3686U-1SET dynadock wireless manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
40 Using the dynadock™ and Adjusting Settings Using the dynadock™ software NOTE If you permanently remove the device, you will not be able to connect to that particular device again until the device has been re-associated. To re-associate the device, follow the instructions in the section "Set up a wireless connection" on page 24. Disable/Enable pop-up messages The Options tab of the Wireless USB Manager enables you to disable or enable pop-up messages that appear in the System tray/Notification Area of your Windows® desktop. For example, a pop-up message informs you when an associated wireless USB device, such as the dynadock™, has been connected or disconnected from your computer. These messages are enabled by default. (Sample Image) The Options tab Change/Select the channel used for radio communication The Communications tab of the Wireless USB Manager enables you to view and change radio settings. The default channel setting is Automatic, which enables the host radio to automatically locate an available channel for communications. NOTE It is recommended to leave this setting on Automatic. If you manually select a channel that is being used by another dynadock™ in the vicinity, the channel bandwidth will be shared by both devices. To maximize performance, a separate channel should be used for each dynadock™.