Toshiba Qosmio G35-AV650 Toshiba Online User's Guide for Qosmio G35-AV650 - Page 284
Performing a media check on a RAID-1 array, Normal, Warning, Start, All Programs, TOSHIBA
View all Toshiba Qosmio G35-AV650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 284 highlights
284 Using the RAID-0 or RAID-1 Utility Toshiba RAID Console Utility ❖ Normal-S.M.A.R.T. is within specifications. ❖ Warning-The threshold value of S.M.A.R.T. has been exceeded. Performing a media check on a RAID-1 array A media check compares the data of the mirrored hard drives in an array to determine if there are any errors. If an error is detected during a media check, the data will be restored on the secondary internal hard disk based on the data on the primary internal hard disk. A media check can only be performed on a mirrored array which is in an optimal state. Refer to "Viewing the status of an array" on page 280 for more information. If the computer is performing a media check and the computer is restarted, the media check will resume when the computer is restarted. NOTE By default the TOSHIBA RAID Utility is set up to perform a media check on the 3rd Wednesday of each month at 12:00 noon. To perform a media check: 1 Plug in the AC adapter and power on the computer. (The computer must be running on power provided by the AC adapter to perform these steps.) 2 Start the TOSHIBA RAID Console utility by clicking Start, All Programs. Then select TOSHIBA, RAID, RAID Console.