Toshiba Qosmio G35-AV650 Toshiba Online User's Guide for Qosmio G35-AV650 - Page 287
default settings., internal hard disk drives and the computer is restored to its
View all Toshiba Qosmio G35-AV650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 287 highlights
287 Using the RAID-0 or RAID-1 Utility Toshiba RAID Console Utility The following menu is displayed: Your machine supports Redundant Array of Independent Disks (RAID). Please select the RAID level. 1. Factory Default Setup the computer ready to support mirroring function. You can use RAID Utility to configure two hard disks to become mirror of each other, in which the same data is written on both hard disks. If one hard disk fails, the system can still run from the other hard disk. Before using RAID Utility, your second hard disk can still work as independent hard disk. Advance Setting (for Advance users only) 2. RAID-1 - Automatically configure two hard disks of your computer to become mirror after recovery process is completed. WARNING: You can not use the second hard disk for any other purpose until you use RAID Utility to end mirroring. 3. RAID-0 - Automatically configure computer to support striping function - data is broken into blocks and written to both hard disks simultaneously to increase the hard disk performance. WARNING: IF ONE HARD DISK FAILS, ALL DATA IS LOST. Enter selection:" (Sample Illustration) Toshiba Recovery DVD RAID Menu 5 Press 1 and then press Enter to break the RAID-0 array. All data is permanently erased from both of your computer's internal hard disk drives and the computer is restored to its default settings. NOTE This process takes approximately one hour to complete.