Toshiba RS-TX60 User Guide - Page 87
To Test, Enter - model
View all Toshiba RS-TX60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Remote Control & DMS Front Lights 2. Enter the search code. Refer to the table below and use the number keys on your remote control to enter the appropriate code. To Test: Enter: TV power, volume, TV input and mute 0999 0999 A/V receiver power, volume, and mute 1999 A/V receiver volume and mute only 1999 After you press the fourth digit of the code, the red light on the end of the remote control will flash twice, then remain on. 3. Test the remote control. Point the remote control at the TV or A/V receiver. Press CHAN UP to test the first code. The test is successful if the TV or A/V receiver responds (by powering off, changing input, or muting, depending on the function you are trying to program). If there is no response, wait two or three seconds, then press CHAN UP again. Continue doing this until the TV or A/V receiver responds. 6 When the TV or A/V receiver does respond, press ENTER to select the current code. The red light at the end of the remote control will flash three times to indicate that the remote control is properly coded to control your device. When the red light on the end of the remote control turns off, you have reached the end of the available codes. Unfortunately, due to the great variety of TVs and A/V receivers, some makes and models are not compatible with your Digital Media Server's remote control. If you reach the end of the available codes without finding a code that works with your device, you will need to use your TV or A/V receiver's remote to turn it on and off, and control the volume. 79 Downloaded from www.Manualslib.com manuals search engine