Toshiba SD-V594 User Manual - Page 42
Timer recording
View all Toshiba SD-V594 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Recording (VCR) Timer recording Timer recording can be programmed on-screen with the remote control. The built-in timer allows automatic unattended recording of up to 8 programs within 1 month. Timer recording DVD/VCR SET +/- ENTER CANCEL VCR MENU EJECT DVD/VCR SELECT TIMER REC Preparation: • Press DVD/VCR to operate the DVD/VCR. • Press DVD/VCR SELECT to select the VCR mode. • Load a cassette tape with the erase prevention tab intact. • Check the time and date are correct ' . Example: Program a timer recording for the 26th day, channel 125 (Cable TV), 11:00 - 11:30 PM on timer program number 1 (Tape speed: SLP). 1 Press VCR MENU. Select "TIMER REC SET", then press ENTER. TSCSAIAYUHMMPSTESTOEREENTRMRUUEESPPCEETASUTEPT OONN OOFFFF +/Ð/ENTER/MENU 2 Press SET + or - to select one of the program line, then press ENTER. DATE START END CH 〈+/Ð/ENTER/CANCEL/MENU 〉 3 Press SET + or - to select the date, then press ENTER. DATE START END CH 26(SA ENTER/CANCEL/MENU 〉 4 Set the start time, end time, channel and tape speed as in step 3. Notes: DATE START END CH 26(SA) 11:00PM 11:30PM125 SLP 〈+/Ð/ENTER/CANCEL/MENU 〉 • Press CANCEL to move cursor backward for correction. • To record from external source set the channel to "L1" or "L2". 5 To enter other programs, repeat steps 2 through 4. • To return to the normal screen, press VCR MENU twice. DATE START END CH 2Ð 6Ð (ÐSÐAÐ )Ð 1Ð1::0Ð0ÐPM 1Ð1::3Ð0ÐPM Ð12Ð 5Ð SLP Ð 〈+/Ð/ENTER/CANCEL/MENU 〉 6 Press TIMER REC. The timer symbol ( ) will appear on the display and the VCR standbys for recording. At the same time, VCR mode will change to DVD mode automatically. You can use DVD even if the VCR is in the timer recording mode. If you do not use the DVD, turn the power off. Notes: • The timer recording will start at 5 seconds before the preset starting time. • If the timer symbol ( ) does not appear on the display when TIMER REC is pressed, the cassette is not inserted 34 . • If the cassette is ejected when TIMER REC is pressed, the erase prevention tab of the cassette may have been removed 34 . • During Timer recording, the power cannot be turned off. Notes: • If the timer symbol ( ) blinks when the timer recording ended, the TV program has not been completely recorded because of an insufficient tape length. Press TIMER REC to cancel the timer program or press EJECT to remove the cassette tape. • During timer recording standby mode, the VCR mode cannot be operated. To use the VCR, first press TIMER REC then press DVD/VCR SELECT to change to VCR mode. After VCR mode is selected, press TIMER REC again to put the VCR into timer recording standby mode. • If you press TIMER REC during timer recording, the recording operation will be interrupted. If you press TIMER REC again within the programmed time, the recording operation will start again. • After a power failure or disconnection of the power plug, all programmed recording settings and time display will be lost upon resumption of power. In this case, reset the clock ' and reprogram any timer recording. 42 2I40301A-En_p40-43 42 21/3/06, 9:44 AM