Toshiba TDP-TW90A Owners Manual - Page 27
Using the Wireless Utility Continued
View all Toshiba TDP-TW90A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Using the Wireless Utility (Continued) ■ Displaying a JPEG image saved on a computer via the projector 1 Launch the Wireless Utility software application. The Screen Image transmission mode window appears on the computer's screen. 2 Click on the File icon . The Wireless Utility window changes to File transmission mode. 3 Click on the Browse button, and select the file to send. Clicking on the Browse button displays the Open dialog box. Select the file to send, then click on the Open button. The selected file is added to the pull-down list in the Wireless Utility's Transmission File field. 4 Select the file to be sent from the pull-down list of the Transmission File field. Click on the Transmission File field's button to display the pull-down list. Select the file to be sent from this list. A thumbnail of the selected file appears in the Preview box. The file displayed here will be transmitted. Step 3 can be skipped. The way that drag and drop the file to be sent from the desktop or Windows Explorer into the Preview box is also available. In this case as well, the selected file is added to the file pull-down list Transmission File field's. 5 Select the projector to be transmitted. The IDs of projectors accessible for communication will be listed. (If projector name has been set up already, it is shown instead of the MAC address.) Select the checkbox of the projector to be transmitted to from this list. Then icon is displayed on the projector's screen for few seconds. It is possible to select up-to four projectors. 6 Click on the button. The selected file's image is displayed by the projector. Note • Only one file can be sent at a time. To send another file, repeat steps 4 and 6 . ■ Operating the projector This function can be used with any projector input. Note, however, that this will not function with a memory PC card. 1 Launch the Wireless Utility software application. The Screen Image transmission mode window appears on the computer's screen. 2 Click on the Remote Control button. The Remote Control window appears. As the Wireless Utility window is still displayed, you can operate the projector via the Remote Control window, while using the Wireless Utility's functions. While it is possible to use this function merely to operate the projector, closing the Wireless Utility also closes the Remote Control window. Operations 52 53