Toshiba TS605 Service Manual - Page 29

MOBILE COMMUNICATIONS DIVISION CUSTOMER SERVICES 2.4 MMI TEST The MMI test application is provided to check or adjust the mobile workability. Dial *#369#* to enter the test mode. Please notice the items 4,5,6 are for production and for special purpose, don't change the default value arbitrarily or may cause mobile malfunction. 1. Contrast: Up& Down to adjust; Ok to save and exit. 2. Test baseband: Up& Down to chose item; Select to enter. „ Illuminate: enter and see if the backlight on; OK to exit. „ Buzzer: enter and listen if the speaker gives sound, OK to exit. „ Vibrator: enter and check if the vibrator on, OK to exit. „ Keypads: press each key to eliminate the indicators on screen. Long press RSK to exit. „ RTC status: enter and check the result of "RTC OK"; OK to exit. „ Microphone speak test: talk to microphone and listen the sound from receiver; OK to exit. „ LCD Test: scroll up/down to sequentially display different colors. Black/ White/ None/ Blue/ Green/ Red/ RGB/ W&B Mix Any key to exit. „ Voice memo: test the voice recording function. „ FM radio: test FM radio function. 3. Software Version: Check the current software version 4. DTM: For production test. Determine if DTMF function valid during calling. 5. Com port: „ AT-DATA: set phone jack for special D/L port, ex: IMEI burning. „ GENIE: for RD specific RF testing „ Off: for endures in normal use 6. Mapping version: Check the current mapping version. 7. Language version: Check the current language version. 8. Auto answer: For production test. Valid setup when insert test SIM Camera: activate camera function Version 1.0 22/11/2006 Created by Konrad Szombara Page 29 of 103