Toshiba TX20 User Manual - Page 85

Remote Control & DMS Front Lights Programming the TV POWER, VOLUME, and TV INPUT Buttons 1. Go to the Remote Control screen. Press the TiVo button to go to TiVo Central®. Select Messages & Setup, then Settings, then Remote Control & DMS Front. Choose which device and/or functions you want to control: To Control: TV power, volume, and TV input mute A/V receiver power, A/V receiver volume volume, and mute and mute only Choose: Remote Control-TV Remote Control-TV Remote Control- Remote Control- (power, volume, mute) (TV Input) A/V Stereo System A/V Stereo System 2. Select the brand of your device. Using the UP/DOWN arrows, highlight the brand of the device you wish to control, then press SELECT. (If you have been using a universal TV remote control, select your TV or A/V receiver's brand, not the brand of the universal remote.) Next you'll see a screen with four-digit codes. 6 3. Prepare the remote control. Point the remote away from your DMS and cover the front end with your hand. Refer to the table below and determine which two buttons to press to prepare the remote. Press and hold the buttons simultaneously for about 5 seconds (until the red light at the end of the remote control lights up and stays on when you release the buttons). To Control: TV power, volume, TV input and mute Press the: TV POWER and TiVo buttons TV INPUT and TiVo buttons A/V receiver power, volume, and mute TV POWER and TiVo buttons A/V receiver volume and mute only MUTE and TiVo buttons 77