Toshiba Tecra A2-S20ST Maintenance Manual - Page 257
LCD Unit/FL Inverter, Replacement Procedures, screws, LCD brackets, LCD module, aluminum tape
View all Toshiba Tecra A2-S20ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 257 highlights
4.19 LCD Unit/FL Inverter 4 Replacement Procedures 8. Remove the following screws securing the LCD brackets. Remove the LCD brackets from the LCD module . • M2x3 SUPER THIN BIND screw x4 M2x3C SUPER THIN BIND LCD Bracket M2x3C SUPER THIN BIND Figure 4-39 Removing LCD Bracket 9. (For 14.1-inch LCD made by Samsung only) Remove the aluminum tape from the LCD module. NOTE: Do not apply power on ICs under aluminum tape because they are easily broken. When discarding broken ICs or FL tube, follow regulations of the local area. Aluminum tape Figure 4-40 Removing Aluminum Tape Satellite A50/TECRA A2 Maintenance Manual (960-478) 4-53
4.19
LCD Unit/FL Inverter
4
Replacement Procedures
Satellite A50/TECRA A2
Maintenance Manual (960-478)
4-53
8.
Remove the following
screws
securing the
LCD brackets
. Remove the LCD
brackets from the
LCD module
.
•
M2x3 SUPER THIN BIND screw
x4
Figure 4-39 Removing LCD Bracket
9.
(For 14.1-inch LCD made by Samsung only)
Remove the
aluminum tape
from the LCD module.
NOTE:
Do not apply power on ICs under aluminum tape because they are easily
broken.
When discarding broken ICs or FL tube, follow regulations of the local
area.
Figure 4-40 Removing Aluminum Tape
M2x3C
SUPER THIN BIND
LCD Bracket
M2x3C
SUPER THIN BIND
Aluminum tape