Toshiba Tecra A2-S20ST Maintenance Manual - Page 99
LAN Troubleshooting
View all Toshiba Tecra A2-S20ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
2.12 LAN Troubleshooting 2 Troubleshooting Procedures 2.12 LAN Troubleshooting To check if the computer's LAN is defective or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 Diagnostic Test Program Execution Check Procedure 2 Connector Check and Replacement Check Procedure 1 Diagnostic Test Program Execution Check Execute the LAN Test in the Diagnostic Program. (Sound/LAN/Modem test Program subtest 03 LAN test) Refer to Chapter 3, Tests and Diagnostics for more info rmation on how to perform the test program. If any error is detected by the test, go to Procedure 2 Procedure 2 Connector Check and Replacement Check The LAN function is mounted on the system board. The modem/LAN jack is connected to the system board by the cable. If the LAN malfunctions, the connection is bad or the system board might be faulty. Disassemble the computer following the steps described in Chapter 4 and perform the following checks: Check 1 Check if the LAN jack is connected firmly to the connector PJ4100 on the system board. If it is loose or disconnected, connect it firmly and return to Procedure 1. If there is still an error, perform Check 2. Check 2 The LAN jack may be defective. Replace the LAN jack with a new one. If the problem persist, perform Check 3. Check 3 The system board may be faulty. Disassemble the computer following the steps described in Chapter 4. Satellite A50/TECRA A2 Maintenance Manual (960-478) 2-45