Toshiba W708 Owners Manual - Page 23
Frame Advance, Double Speed Playback, Shuttle Dial Operation, PLAY/x2, PAUSE/STILL, shuttle dial
View all Toshiba W708 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Frame Advance A picture advances frame by frame. 1 Press PLAY/x2 during still playback. Each time you press PLAY/x2, the picture advances one frame. If you press and hold PLAY/x2, the tape runs at 1/30th the normal playback speed. To resume normal playback Press PAUSE/STILL. Double Speed Playback A tape runs at twice the normal speed. 1 Press PLAY/x2 during playback. The picture runs at twice the normal playback speed. To resume normal playback Press PLAY/x2. PLAYBACK Shuttle Dial Operation You can also activate the picture search and slow playback at various speeds by turning the shuttle dial on the VCR. 1 Turn the shuttle dial on the VCR. Initial mode of tape operation foFrawsatr-ding Rewinding rection: Reverse Rewinding Stop Playback Playback dir Playback di forFwaarstd-ing x2 plsapDyeobeuadbclke ection: Forward Rpelaveybrsaeck-x1 x5 seaPriccthure Picstueraerch -x5 Rpelaveybrsaeck -x1 Reverse Rewinding Still sPeiacrtcuhre -x7 playback pRlaeyvbearcske -x1 -x1 x1/15 x1/7 Slow x1 Slow Npolarmybaal ck x7 PSicetuarrech Ffaosrwt-arding The playback speeds differ depending on the recording tape speed of the tape as follows. Picture search Reverse playback SP: x5 x7 -x1 SLP: x15 x21 -x3 Notes • The still picture mode will be released automatically after about 5 minutes and forward playback will start. • Fast-forwarding or rewinding started from the stop mode continues even if the shuttle dial is released. To stop, press STOP. • The reverse playback mode will be released automatically after about 25 seconds and forward playback will start. • Noise bar may appear in reverse playback. Note If you playback a tape recorded in the SLP tape speed or a tape recorded on another VCR in various speed mode, the picture may be noisy or monochrome. 23